GE Universal Remote Codes for Sanyo TV

GE universal remote is one of the best remotes that will save your day when it comes to TV programming. Having this remote will make you able to operate it on any TV or soundbar that you want. So when it comes to only Sanyo TV, then this remote has a solution for you. Due to GE universal remote codes for Sanyo TV, users can finally use their Sanyo TV with this remote.

With the help of this guide, users can get to know how to program a GE universal remote to a Sanyo TV with and without codes as well. These are 5-digit and 4-digit codes for Sanyo TV. Users can use these codes for old and new Sanyo TVs.

GE Universal Remote Codes for Sanyo TV

Here are the 3 digits, 4 digits, and 5 digits GE universal remote codes for Sanyo TV that you can use in 2023.

3 Digit Codes for Sanyo TV

209, 180, 012, 091, 110, 049, 013, 268, 004, 081, 108, 345, 912, 634, 285

4 Digit Codes for Sanyo TV

• 5412
• 5052
• 5407
• 0012
• 5241
• 0268
• 5224
• 5034
• 5233
• 1911
• 0004
• 5261
• 1051
• 1581
• 1531
• 5151
• 5191
• 5001
• 5430
• 5018
• 5139
• 5234
• 5001
• 5032
• 5014
• 0049
• 5038
• 5022
• 5138
• 0110
• 0180
• 0097
• 5089
• 5118
• 1261
• 5029
• 0081
• 2881
• 0108
• 5055
• 1161
• 3481
• 2871

5 Digit Codes for Sanyo TV

84538, 01576, 92015, 28013, 54120, 65001, 34871, 49761, 39812, 09125, 81045, 18560

How to Program a GE Universal Remote to a Sanyo TV?

To program a GE Universal Remote to a Sanyo TV, you can follow these general steps:

1. Ensure that the Sanyo TV is powered on and in a state where it can receive remote signals.
2. Find the code for your specific Sanyo TV model. You can check the GE Universal Remote code list that came with your remote or visit the official GE Remote Code Finder website (if available) to search for the correct code.
3. Once you have the correct code, turn on the GE Universal Remote and press the “Setup” or “Code Search” button. This button’s label may vary depending on the specific model of the remote.
4. Press the button for the device you want to program, which is “TV” in this case.
5. Enter the code for your Sanyo TV using the number pad on the remote. Make sure to enter the digits correctly.
6. After entering the code, the remote’s indicator light should turn off or blink, indicating that the code was accepted.
7. Test the remote by pressing a few buttons like “Power” or “Volume Up” to see if the TV responds. If the TV responds, the programming is successful. If not, repeat the steps using a different code from the list until you find the correct one.

If you don’t have the code list or are unable to find the correct code, you can try the code search method instead of directly inputting the code. Here’s how:

1. Turn on the Sanyo TV and the GE Universal Remote.
2. Press and hold the “Setup” or “Code Search” button on the remote until the indicator light turns on.
3. Press the “TV” button on the remote to ensure you’re programming it for the TV.
4. Press the “Power” (or “On/Off”) button on the remote repeatedly while pointing it towards the TV. Keep doing this until the TV turns off.
5. Once the TV turns off, press the “Setup” button again to lock in the code. The indicator light should turn off or blink.
6. Test the remote by pressing some buttons to control the TV. If it works, the programming is successful. If not, repeat the steps, and the remote will cycle through different codes during the search process.