Universal Remote Codes for Sceptre TV

You should know that a Sceptre TV can be controlled by any universal remote and that is why you are here. You must be wondering what universal remote codes for Sceptre TV are and how to program Scptyre remote to TV. Well, you will get an answer in this article. We will let you know about all the universal codes that you can use with GE, RC73, Philips, Firestick, and Onn universal remotes. 

Universal Remote Codes for Sceptre TV

To program a universal remote to control a Sceptre TV, you can try using one of the following Sceptre TV remote codes. Keep in mind that the effectiveness of these codes may vary depending on the model of your universal remote.

Here are some common Sceptre TV remote codes:

• 11360
• 11217
• 10878
• 11599
• 10000
• 10017
• 10019
• 10030
• 10032
• 10178
• 10463
• 11687
• 11826
• 11933

Sceptre TV codes for Philips Universal Remote

4 Digits Codes:

• 4101
• 4071
• 3521
• 5321
• 4071
• 6671
• 5321
• 1244
• 1814
• 4071
• 1071
• 3521
• 3521
• 5111
• 5111
• 5111
• 4101
• 1071
• 1071
• 1071
• 5111
• 4101,
• 4071
• 6671
• 5321
• 4101
• 5321
• 0516
• 3521
• 1318

5 Digit Codes:

• 11046
• 15235
• 13251
• 13175
• 15570
• 10717
• 11150
• 10742

If the Sceptre TV does not respond to the remote after entering a code, you can try the code search method. Here’s how:

1. Turn on the Sceptre TV and the universal remote.
2. Press and hold the “Setup” or “Code Search” button on the remote until the indicator light turns on.
3. Press the button for the device you want to program (e.g., “TV”).
4. Press the “Power” (or “On/Off”) button on the remote repeatedly while pointing it towards the TV. Keep doing this until the TV turns off.
5. Once the TV turns off, press the “Setup” button again to lock in the code. The indicator light should turn off or blink.
6. Test the remote by pressing some buttons to control the TV. If it works, the programming is successful. If not, repeat the steps, and the remote will cycle through different codes during the search process.

If you don’t have any success with the provided codes or the code search method, we recommend referring to the instruction manual that came with your universal remote. The manual may provide a specific process or additional codes for programming a Sceptre TV.

How to Program a GE Universal Remote to a Sceptre TV?

To program a GE Universal Remote to control a Sceptre TV, you can follow these steps:

Step 1: Check the Compatibility

Make sure that your GE Universal Remote is compatible with Sceptre TVs. Refer to the remote’s user manual or visit the manufacturer’s website for a list of compatible devices. Look for the Sceptre TV brand in the code list provided.

Step 2: Turn on the TV

Ensure that your Sceptre TV is turned on and functioning properly. Keep the remote and the TV within close proximity for the programming process.

Step 3: Find the Code

You will need to find the correct programming code for your Sceptre TV. The GE Universal Remote typically includes a list of codes in the instruction manual. If you don’t have the manual or the code is not listed, you can try the code search method.

Step 4: Code Search Method (if needed)

If you cannot find the code in the list provided, you can use the code search method to automatically search for the correct code. Here’s how:

Turn on the TV.

1. Press and hold the “Setup” button on the remote until the red indicator light stays on.
2. Press the “TV” button on the remote. The indicator light should blink once and then remain steady.
3. Press the “Power” button on the remote. The remote will send power signals to the TV. Keep pressing the “Power” button every few seconds until the TV turns off.
4. Once the TV turns off, press the “Enter” button on the remote to save the code. The indicator light should turn off.
5. Test the remote by pressing the “Power” button to turn on the TV. If it works, you have found the correct code. If not, repeat the process from step 2.

Step 5: Manual Code Entry Method

If you have found the correct code in the list provided, follow these steps:

1. Turn on the TV.
2. Press and hold the “Setup” button on the remote until the red indicator light stays on.
3. Press the “TV” button on the remote. The indicator light should blink once and then remain steady.
4. Enter the four-digit code for your Sceptre TV using the numeric keypad on the remote. The indicator light should turn off.
5. Test the remote by pressing the “Power” button to turn on the TV. If it works, you have successfully programmed the remote. If not, repeat the process using a different code from the list.
6. Step 6: Final Testing
7. Once you have programmed the GE Universal Remote with the correct code, test the remote to ensure that all the functions work properly. Try changing channels, adjusting volume, and accessing other features of your Sceptre TV.